Beger SUPER GOLD A/E 234

• Acrylic oil gold paint A/E 234 Swiss gold shade, ultra-premium grade.
• Covering an area of 30-40 square meters/gallon/trip
• Suitable for spraying or painting on concrete, steel, metal and wood surfaces,
• solvents, thinners Beger M-1199 or M-1188.

• mixed with pearl powder Beautiful color, bright, clear, not sinking.
• Resistant to UV light and hot weather, sun, rain in Thailand as well.
• Excellent adhesion to the surface without peeling
• Easy to use, quick drying, safe, mercury and lead free.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• Allow the cement surface to dry completely for at least 1 mounth and have less than 14% moisture content, then clean the grease stains. and dust all out

• Scrub the old paint that has peeled and deteriorated completely. (Do not use a wire brush), then clean it.
• In case of mold and algae Should be scrubbed out before Then use a moss fungicide solution. Beger Mold Free M-001 impregnates without rinsing.
• after cleaning Apply Beger ProQuick B-1900 Multipurpose Cement Primer 1 coat.

• The case is an old wood that has never been painted before. or is it a wood that has been painted in the past and deteriorated peeling paint film Use sanpaper to sand until the original wood.
• In case of new wood, use sandpaper to sand off excess wood burrs. Then clean the surface free of dirt.
• To protect the wood from fungi, termites, weevils and other woodeating insects, it should be treated with clear painted Beyerdrite. (water or oil formula) 1 time

• Clean all grease and dust. The surface is shiny. Use fine sandpaper no. 220-280 to sand the surface to increase adhesion.
• In the case of rusted metal, the rust should be polishes out frist.

• Apply or spray with Primer A/E 8855 yellow acrylic lacquer or 1 coat A/E 8866 red acrylic lacquer primer, can be mixed with Beger thinner M-77 or M-5588 in Volume 5-10% for applying or 10-15% for spraying depending on the application. 

• Mix Beger gold paint A/E 234 with Thinner Beger M-1199 or M-1188 in a ratio of 1 : 1 and apply 2-3 times.
• In case of wanting to add shadows can be coated with Acrylic Lacquer Gloss A/E 4400

• Mix Beger A/E 234 gold lacquer with thinner Beger M-1199 or M-1188 in a ratio of 1 : 2 and spray 2-3 rounds.
• In case of wanting to add shadows can be coated with Acrylic Lacquer Gloss A/E 4400

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***