Beger WoodStain

• The color penetrates deep into the wood. hold firmly super resin Color film does not crack, does not peel off
• 100% translucent color film showing clear wood grain with Crystal Clear, clear shade G-1900
• Excellent protection against UV rays with UV Guard.
• Prevents water from entering, but the wood can still emit moisture. The paint film is flexible, so it doesn't crack and peel off.
• Prevent mold and wood-eating insects
• The color film is smooth, not blotchy.
• safe for residents with European safety standard EN71

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• 1.1 In case the wood has been painted before and the paint film peels off, or it is an old wood that has never been painted before To sand with sandpaper until the original wood. If it's new wood, sand it to remove excess wood burrs. then clean The surface is free from grease, dust, oil or foreign matter.
• 1.2 In case the wood stain film is in good condition To pat the film surface with sandpaper No. 320 and clean the surface to be free from grease, dust, oil or foreign matter. 
• 1.3 If in the case of rubber wood. The rubber should be wiped clean with thinner M - 77.
• 1.4 Fill the hole or nail head with Bayer wood filler, leave for 30 minutes, then polish with sandpaper and clean.

• Can be applied without foundation

• 3.1 Stir the paint thoroughly until homogeneous before use and keep stirring during application. by people from the bottom of the container to the top
• 3.2 Can be applied without thinner But if in the case of very hot weather should be mixed with Beger thinner M-1199 not more than 5 - 10%.
• 3.3 Dip the paint and wipe the paint until it is damp before applying. Do not apply with a brush that is too saturated.
• 3.4 Apply according to the wood grain and must be applied back and forth to allow the paint to penetrate better into the wood.
• 3.5 For external wood floors should be applied 3 coats, but in the case of internal wooden floors, usually only 2 coats will be applied. In which each trip is left to dry for 8-10 hours and should be applied to all sides of the wood. for the best protection

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***